The Rosewood Crochet Tie Up Top is a free pattern for a lightweight crochet mesh top. It is designed for a beautiful drape, soft structure, and an easy tie-front silhouette. We made ours using a fine weight yarn worked double stranded – however as this is a made to measure your gauge is flexible. This long sleeve crochet top creates an airy, breathable fabric that feels comfortable to wear across seasons. We love the soft pink, grey, and warm brown ombré tones in our yarn – reminds us of a beautiful sunset. With its relaxed fit and delicate mesh stitch, this crochet tie up top is an easy to wear, modern design.

We don’t design a lot of tie up crochet tops but we feel like we should! Our last one was the gorgeous Lacy Holiday Tie Up Crochet Cardigan that we wore over Christmas. Every time we wear it (yes we definitely wear it outside of Christmas!) we get asked “where did you buy this?” – and as a result, we have been meaning to design another tie up top for a while! They feel a little more dressed up than a slouchy cardigan, and have this fun modern feel to them.
Please support us: We are trying to keep all our crochet patterns free for everyone, when you access them online. We meet the costs of running this website through coffee donations at https://ko-fi.com/kiksandjackcrochet and ad revenue. When you buy us a cup of coffee, you buy us a cup of motivation. Thank you for keeping us motivated and inspired every day to keep designing free crochet patterns for you.
We absolutely love the ombre colors in this beautiful yarn. It’s a weight 1 yarn – but its 100% acrylic which we don’t see very often. Cotton and cotton blends? Yes. Acrylic? – not as common coming through on our design table. We were super excited and tried to use this yarn for multiple tops including The Coral Bay Mesh Net Top. However this is the first time we double stranded it … and the most amazing drape fell out of the yarn. It was perfect for our version of The Rosewood Crochet Tie Up Top.
We also love this super simple stitch. It creates even more drape and is so straightforward and fast to crochet. Our version of The Rosewood Crochet Tie Up Top was done with a lot of the time focused on Netflix instead of our crochet – that’s how easy the stitch is.

Let’s get you started on The Rosewood Crochet Tie Up Top so you have it ready for the upcoming warmer months.
Please support us by following us on social media – it really does help us out. Simply click on the icons below and we will keep you up to date on new free pattern releases. Tag us your version of The Rosewood Crochet Tie Up Top so that we can add your work to our stories and share it with our followers too!
DESCRIPTION of The Rosewood Crochet Tie Up Top
The Rosewood Crochet Tie Up Top is a lightweight and airy crochet mesh top designed with beautiful drape and an easy, relaxed silhouette. This beginner-friendly pattern features a simple mesh stitch worked double stranded to create a soft, flowing fabric that feels delicate and wearable. The design is minimal and modern, and is finished with a lacy edge and an elegant tie closure at the front. The Rosewood Crochet Tie Up Top is meant to be worn loose and slightly oversized.
The Rosewood Crochet Tie Up Top is a free and easy crochet pattern written as a size inclusive, made-to-measure design. It is suitable for beginners and can be adapted to different gauges. We recommend using a draping yarn to achieve a similar lightweight mesh fabric. For our version, we used a soft pink, grey, and warm brown ombré tones that gives this piece its signature “rosewood” finish, making it a versatile handmade layer you can style across seasons.
CROCHET MEASUREMENTS & SIZES
Like many of our crochet designs, The Rosewood Crochet Tie Up Top is made to be tailored to your own measurements, ensuring a customized fit. At Kiks + Jack Crochet, we believe in “made to measure” pattern instructions. Rather than giving fixed stitch counts for standard commercial sizes, we guide you through crocheting a custom-fit cardigan based on your personal measurements and your own gauge. As a result you do not need to match our gauge exactly.
Below, we have outlined all the measurements you will need for The Rosewood Crochet Tie Up Top, along with tips on how to take them accurately. Write down your measurements and keep them handy. We will also provide example calculations using our measurements. A standard size chart is included further down for convenience if you find taking measurements difficult.
Chest/Bust: Measure around the fullest part of your chest/bust. Do not draw the tape too tightly.
Finished length: Measure from where you would like the top to end, up to the top of your shoulder.
Armhole Depth Measurement: Measure from the top outside edge of the shoulder down to the armpit. You may want to check that this measurement – when doubled – is as big as your upper arm circumference (around your bicep). Typically it is, however every body shape is different. If your upper arm circumference is larger, take this measurement instead.
Length to Armpit Measurement: Measure from where you would like the top to end up to your armpit.
Arm Length: With arm slightly bent, measure from armpit to wrist (or where you would like the sleeve to end)
Wrist Circumference: Measure from one point on your wrist all around your wrist.
Standard Sizing (For Reference) for The Lacy Holiday Crochet Tie-Up Cardigan
If you would like to use standard sizing for the chest/bust – then for XS (S, M , L, XL, 2XL, 3XL, 4XL, 5XL) use approximately 28-30 (32-34, 36-38, 40-42, 44-46, 48-50, 52-54, 56-58, 60-62) inches or 71-76 (81-86, 91-96, 102-107, 112-117, 122-127, 132-137, 142-147, 152-158) centimetres.
If you would like to use standard sizing for arm length – then for XS (S, M , L, XL, 2XL, 3XL, 4XL, 5XL) use approximately 16.5 (17, 17, 17.5, 17.5, 18, 18, 18.5, 18.5) inches or 42 (43, 43, 44.5, 44.5, 45.5, 45.5, 47, 47) centimetres
If you would like to use standard sizing for armhole depth – then for XS (S, M , L, XL, 2XL, 3XL, 4XL, 5XL) use approximately 6-6.5 (6.5-7, 7-7.5, 7.5-8, 8-8.5, 8.5-9, 9-9.5, 9.5-10, 10-10.5) inches or 15.5-16.5 (16.5-17.5, 17.5-19, 19-20.5, 20.5-21.5, 21.5-23, 23-24, 24-25.5, 25.5-26.5) centimetres
Note: The Rosewood Crochet Tie Up Top is designed as an oversized fit with significant positive ease.
CROCHET GAUGE
The Rosewood Crochet Tie Up Top pattern is made to measure and can accommodate for different crochet gauges. You do not need to swatch and match to our gauge however we strongly suggest for this pattern you use a yarn with drape.
We used a 5mm crochet hook and a weight 1 yarn double stranded.
Just a note about this yarn, our drape came in double stranding the yarn because it is 100% acrylic. Any draping yarn up to a weight 3 or 4 would work for this pattern – it does not need to be double stranded – but it should drape. We have suggestions for substitutions in the next section.
CROCHET MATERIALS for The Rosewood Crochet Tie Up Top
This section contains product affiliate links. We may receive a small commission (at no extra cost to you) if you make a purchase after clicking on one of these links.
Kiks + Jack Crochet promises to only recommend products that we love and that we use. Thank you for supporting us.
Yarn brand: Mandala String by Lion Brand Yarn. Weight 1/Super Fine/Fingering. 100g skein and 350 yards (or 320m). NOTE we double stranded this yarn! Color used is Soul.
Approximately 4.5 skeins or 1575 yards (or 1440m) used for the Kiks + Jack Crochet version with a finished width of 18 inches and a finished length of 18 inches.
Other yarns we would love to try for The Rosewood Crochet Tie Up Top include:
Bamboo Fair by Premier Yarn (super budget friendly)
5 mm and 4mm crochet hook. We use many different crochet hooks and if you are looking for some great budget friendly ergonomic crochet hooks try these from Amazon. It comes in a set and the grip and the shape is amazing for beginner crocheters. We also love the slightly more pricey crochet hooks from Clover Crochet Hooks and the beautiful Furls Crochet Hooks (these are so stunning, we just love looking at them!)
Yarn Winder!!! (Our new LOVE). We had held off on a yarn winder for a long time. We love the idea of crochet being simple with just a hook and some yarn. However we decided to get this yarn winder, because it was affordable and we weren’t sure about investing in a super fancy one yet. We love it because it breathes life back into scrappy yarn lying around that looks messy. It’s simple to use and is holding up really well for us.
Measuring Tape. We use a super budget friendly measuring tape. Make sure it has cm and inches (not all patterns are written with both). We are always crocheting on the go so we like our tapes small and compact and we put one in our design area, one in our bag and one in our car. Retractable works best! We use these super cheap mini measuring tapes from Amazon
Stitch Markers. We use these locking crochet stitch markers from Amazon and these stitch markers that do not lock. They are cheap and colourful.
Blocking Pins. You should buy more pins than you think you need. If you are going to take the time to block don’t skimp on the pins. We like T shaped stainless steel pins that don’t rust when they get wet. We love these blocking T pins from Amazon and the tin means the pins don’t fall out on the floor.
Yarn Needle. Buy blunt needles with large eyes for yarn. We use these Yarn Needles because we like the convenient bottle, they are budget friendly and we get lots of them!
Scissors. We love these thread snippers because they are cheap, we get two of them AND they come with a case (some don’t). Don’t carry these without the case! After you use thread snippers you won’t want to snip with scissors.
CROCHET STITCHES & ABBREVIATIONS
We use US terms and abbreviations for The Rosewood Crochet Tie Up Top pattern.
ch = chain (With one loop on your hook, yarn over and pull through the loop)
sc = single crochet (Insert hook into desired stitch. Yarn over and pull through the stitch. You now have two loops on your hook. Yarn over and pull through all two loops)
dc = double crochet (Yarn over and insert hook into desired stitch. Yarn over and pull through the stitch. You now have three loops on your hook. Yarn over and pull through the first two loops. You now have two loops on your hook. Yarn over and pull through all two loops)
ch-sp = chain space (eg. crochet into the space and not the stitch)
tch = turning chain
sl st = slip stitch (Insert hook into desired stitch. Yarn over and pull through the stitch and the loop on your hook)
st = stitch
sk = skip stitch
* = repeat the instructions following the * as directed
Note unless stated otherwise turning chains do not count as a stitch if there are 1 or 2 chains and the turning chain does count as a stitch if there are 3 or 4 chains.
SUMMARY of CONSTRUCTION for The Rosewood Crochet Tie Up Top
The Rosewood Crochet Tie Up Top begins by crocheting the main back panel using a simple mesh stitch that creates a soft, drapey fabric. Next, two front panels are worked, to form the open front and allow for an easy tie-up closure.
Once the body panels are complete, we move on to the sleeves. Each sleeve starts with a ribbing crocheted and shaped if necessary to comfortably fit the arm. The panels are then joined at the shoulders, and the sleeves are seamed onto the body to create the finished structure.
To complete The Rosewood Crochet Tie Up Top, a lace cluster edging is added along the front opening, and a simple tie is crocheted to secure the top low at the front.
PERMISSIONS AND COPYRIGHT for The Rosewood Crochet Tie Up Top
You may not publish or share any pattern on this website www.kiksandjackcrochet as your own including this pattern The Rosewood Crochet Tie Up Top. Except as permitted by the copyright law applicable to you, you may not reproduce or communicate any of the content on this website, including files downloadable from this website, without the permission of the copyright owner, Kiks + Jack Crochet.
You may not use any Kiks and Jack Crochet photo as your own photo.
You may crochet items to sell using The Rosewood Crochet Tie Up Top pattern upon permission by email at kiksandjackcrochet@gmail.com. Please link back to this post in exchange.
CROCHET PATTER INSTRUCTIONS for The Rosewood Crochet Tie Up Top
Crochet the Main Back Panel
Note: We double stranded our weight 1 Mandala string. We didn’t always use the exact same two colors when we double stranded. We tried to roughly match the colors on our sleeves and on the front and back panels.
Calculate the length of your foundation chain as follows:
| Calculation | Kiks + Jack Crochet Example |
| Halve your “Chest/Bust Measurement“ | Our chest/bust measurement = 32 inches around Half our chest/bust measurement = 32/2 = 16 inches |
| Add additional 2-3 inches for positive ease. This top is designed to be oversized. | 16 + 2 = 18 inches |
Chain a length as calculated above counting the number of chains at the same time. Do not pull the chain too tight when you measure it.
Make sure the number of chains ends on a multiple of 3. If not, increase the number of chains so that you finish on a multiple of 3.
Add 1 more chains.
For example Kiks + Jack crocheted 70 chains to reach a total length of 18 inches as per our calculation. However 70 is not a multiple of 3 (it does not divide into 3 evenly). Therefore we increase the number of chains to a total of 72 so that it is a multiple of 3. We then crocheted an additional chain for a total of 73 chains.
Row 1: ch3, dc into 4th ch from hook, *sk 2 ch, [1dc, ch1, 1dc] into next ch, rep from * to end of row until last 3 ch, sk 2 ch, 1dc in last ch. Turn
Row 2: ch4 (counts as a st and ch1), dc into 1st st, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row until last dc, sk dc, dc into top of tch. Turn
Row 3-4: repeat row 2
Important Note: It’s a great time to do an intuitive check. Hold the panel up against you and ensure you are happy with the width. Yarn stretch and personal preference can change how it feels, so this quick check is helpful. If you need to adjust the width, restart by increasing or decreasing the foundation chain length – just remember to follow the correct stitch multiple.
Repeat row 2 until your back panel reaches your desired “Finished Length Measurement“.
Fasten off.
Crochet the Front Panel (Make 2)
You will now crochet 2 panels that will make up the front of your cardigan.
Let’s calculate the initial foundation chain for the front panel.
| Calculation | Kiks + Jack Crochet Example |
| How many total chains did you crochet in your initial foundation chain (multiple of 3) for the back panel without the additional 1 chain? | We crocheted 72 chains. |
| Divide this number by 2 | 72/2 = 36 chains |
| Round down to the nearest 3 or keep as is if it is already a multiple of 3. | 36 chains (already a multiple of 3) |
| Add 1 more chain. | 36 + 1 = 37 chains |
Chain a length with the same number of chains as calculated above. Try to crochet with the same tension as you used for the back panel. For example, Kiks + Jack would crochet 37 chains
Row 1: ch3, dc into 4th ch from hook, *sk 2 ch, [1dc, ch1, 1dc] into next ch, rep from * to end of row until last 3 ch, sk 2 ch, 1dc in last ch. Turn
Row 2: ch4 (counts as a st and ch1), dc into 1st st, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row until last dc, sk dc, dc into top of tch. Turn
Repeat row 2 until your top reaches the “Length to Armpit Measurement“.
Do not fasten off.
Neckline: Select Option 1 or 2
You now have two options to customize the neckline to your dimensions and personal preference. We will also share below how best to select the right option for you.
Option 1: Do not shape for the neckline (we selected this option for our photographed version). As our top is oversized and wide for our dimensions (ie. significant shoulder drop) AND we want to place our tie-string low (approx 30% from the bottom), we did not need to shape for the neckline. Our version creates a naturally wide low “V neck” shape.
If you would like to select this Option 1, then keep repeating Row 2 until the front panels are the same length as your back panel. Next, move to the section: “Crochet the Sleeve Panel”
Option 2: You shape gently for the neckline. This option is better if you plan to tie the string higher up (armpit level) or your top is a tighter fit and you need to create some space around the neckline.
If you would like to select Option 2, then at this point you will start crocheting “decreasing rows” as per the instructions outlined in the section below: “Option 2 Shape Front Panel for Neckline”.
How do you select the right Option for you?
We took our half finished front panel and attached it to the top of our back panel using stitch markers (place a SM at the crochet hook so it doesn’t unravel). Then we placed the front panel over our front and observed how it fell across the front of our body. This is what Option 1 would look like.
If you like the way it falls and feel there is sufficient room, then select Option 1 (it is a simpler construction too). If you think you would like to crochet more space around the neckline (ie. decreasing the width), then select Option 2. If in doubt, option 2 is the safest option.
Option 2: Shape Front Panel for Neckline
Place the front panel in front of you so that your working yarn is on the left side.
Place a stitch marker on the right side. This stitch marker will represent the centre of your front panel – and you will shape along this centre. Pick up your working yarn and start on Shaping Row A below.
Shaping Row A: ch4 (counts as a st and ch1), dc into 1st st, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row until last dc, dc into last dc (not tch). Turn
Shaping Row B: ch2, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row until last dc, sk dc, dc into top of tch. Turn
Shaping Row C: ch4 (counts as a st and ch1), dc into 1st st, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row until last [1dc, ch1, 1dc] cluster, dc into 2nd dc of last cluster. Turn
Shaping Row D: repeat Shaping Row B
Shaping Row E: repeat Shaping Row C
At this point, measure the front panel width at the start (base) and compare it to the current width after shaping. Continue repeating Shaping Rows B–C until the width has been reduced by approximately 25–30% from the original width (adjust based on your preferred fit). It can be helpful to periodically hold the piece against your body for an intuitive fit check.
When you do not need to shape anymore (ie. do not need to reduce the width anymore) then continue with Non Shaping Row F as follows (we assume you have just finished a Shaping Row C):
Non Shaping Row F: ch4 (counts as a st and ch1), dc into 1st st, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row, dc into top of tch. Turn
Keep repeating Non Shaping Row F until your front panel reaches the same length as your back panel.
Fasten off.
**Don’t forget you need to crochet two matching front panels!
Crochet the Sleeve Panel (Make 2)
We will now crochet the two sleeve panels starting with the cuff. Remember you will need to make two identical sleeve panels.
Crochet the Sleeve Panel Ribbed Cuff
ch 12
The height of our sleeve ribbing is approximately 2.5 inches. Based on our gauge this is approximately 12 chains. However you can adjust the number of chains if you want to change the height of the ribbing or you are using a yarn with a different gauge.
Row 1: 1 hdc in 3rd ch from hook, hdc in each ch across. Turn.
Row 2: ch2, hdc BLO in each st across. On the last st, hdc into the whole st. Turn
Repeat row 2 until the ribbed cuff is equal to your “Wrist Circumference Measurement” + 2 inches. Make sure it fits comfortably and is not too tight.
Count the number of rows (we crocheted 20 rows).
Do not fasten off. Turn your ribbing. You will now crochet down the long side of the ribbing.
Crochet the Main Sleeve Panel
| Calculation | Kiks + Jack Example |
| Count the number of rows in your sleeve ribbing | We crocheted 20 rows |
| Double it | 20 x 2 = 40 stitches |
| Round this to the closest multiple of 3 and add 1 | 40 is rounded down to 39 stitches (closest multiple of 3) and add 1 = 40 stitches |
Row 1: Using the working yarn, ch1, sc into the first st, sc across the ribbing the number of stitches you calculated above. Turn
In K+J example above we will crochet 40 single crochets evenly across the long side ribbing. It will probably be quite tight. We use stitch markers to help us crochet evenly.
Row 1: ch3, dc into 4th ch from hook, *sk 2 ch, [1dc, ch1, 1dc] into next ch, rep from * to end of row until last 3 ch, sk 2 ch, 1dc in last ch. Turn
Row 2: ch4 (counts as a st and ch1), dc into 1st st, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row until last dc, sk dc, dc into top of tch. Turn
Repeat row 2 until the length of the sleeve panel (including ribbing) is equal to approximately 1/3 way up your forearm.
At this point, measure the width of your sleeve panel. You need this width to eventually be [2 x your Armhole Depth Measurement + 1.5 inches]. For example our armhole depth measurement is approximately 6.5 inches. So we need the width of our sleeve panel to be approximately 14.5 inches wide.
We will now use expanding rows until the sleeve panel is wide enough based on your dimensions.
Expanding Row A: ch4 (counts as a st and ch1), dc into 1st st, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row, [1dc, ch1, 1dc] into top of tch. Turn
Expanding Row B: ch4 (counts as a st and ch1), dc into 1st st, [1dc, ch1, 1dc] into 2nd dc of the 1st cluster (the extra cluster you made at the end of Expanding Row A), *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row, [1dc, ch1, 1dc] into top of tch. Turn
Regular Row C – D: ch4 (counts as a st and ch1), dc into 1st st, [1dc, ch1, 1dc] into 2nd dc of the 1st cluster, *[1dc, ch1, 1dc] into 2nd dc of the next cluster, rep from * to end of row, dc into top of tch. Turn
At this point, measure the width of your sleeve panel again. If you still need to expand, then repeat this process again ie. crochet “Expanding Rows A-B” followed by crocheting “Regular Rows C-D”, then take a measurement of the width. Repeat this until your sleeve reaches your desired width.
When your sleeve is wide enough, stop crocheting “Expanding Rows A-B” and just continue crocheting “Regular Row C” until the length of the sleeve panel including the cuff, is equal to your “Arm Length Measurement“.
Fasten off.
Remember you need to crochet two identical sleeve panels.
Assembling The Rosewood Crochet Tie Up Top
Kiks + Jack Crochet strongly recommends blocking your panels before assembling your sweater. Blocking helps each piece hold the exact shape and size you need. To block, we pin our panels onto an old yoga mat, carefully adjusting the edges and shaping them. Once pinned, we spray the pieces with water, paying special attention to the edges and making sure the fabric is thoroughly saturated. Then we leave the pins in place until the panels are fully dry.
Step 1: Seam the Front and Back Panels at the shoulder.
Place a front panel on top of the back panel and line it up at the side and shoulder. With a yarn needle and matching yarn, seam the panel together across the shoulders. Start from the edge and seam up to the end of the front panel. Fasten off. Do the same with the second front panel on the other side of the back panel.
Step 2: Line up your sleeves at the midway point to the shoulder and seam. Open up the two panels (now seamed at the shoulders) so that the right side is facing the floor and the wrong side is facing upwards. Take one of your crocheted sleeves and fold it in half lengthways. Place a stitch marker at the top of your sleeve at the centre point. With the wrong side of the sleeve facing up, attach this stitch marker to the left edge of the left shoulder seam.
Do the same on the right side with the other sleeve.
Tip: Check your sleeve length. We recommend temporarily attaching the sleeve panel to the body using a few locking stitch markers so you can try it on for fit. If you’d like your sleeves longer, just add more rows to your sleeve panel. To do this, unpick the final knot where you fastened off, rejoin your yarn, and crochet as many extra rows as you need. If you prefer shorter sleeves, unpick the knot and unravel (frog) rows until you reach the length you want. Remember to adjust the second sleeve the same way so both sides match evenly.
When everything is perfect, using a yarn needle and matching yarn, seam the sleeves to the main panels (wrong side facing up).
Step 3: Seam the sides of the cardigan and the bottom of the sleeve together. Fold the panels and sleeve panels at the seamed shoulders so that your cardigan is facing wrong side out. With a yarn needle and matching yarn, seam the sides of the two panels together up to the armpit and along the bottom of the sleeve.
Fasten off.
Crochet the Neckline Edge for The Rosewood Crochet Tie Up Top
Turn the cardigan correct side out.
Use a smaller hook size. We dropped from a size 5mm to a 4mm and we only used a single strand.
Attach the yarn at the bottom of your front panel. Start with the side that works best for you.
Row 1: ch1, sc around the entire front opening from one end at the bottom all around the neckline to the other end and count the stitches at the same time. Try to crochet evenly ie. approximately the length of one stitch. End on a multiple of 4 + 1. Turn
Row 2: ch1, sc into 1st st, *sk1, 5dc in next st, sk1, 1sc in next st, rep from * to end, ending with a sc in last st.
Fasten off.
Crochet the Centre Tie for The Rosewood Crochet Tie Up Top
Use a smaller hook size. We used a 4mm hook and single strand only.
Chain a length that allows you to tie the two front panels together.
We crocheted approximately 18 inches. Turn and single crochet into the 2nd chain from the hook, sc in each st across the row until the last st. Fasten off. Tip: we left a long tail then used a yarn needle to weave the tail back into the string.
If you did not shape the front panels then you can place the tie anywhere that works for you (we did not shape our panels and tied it low). If you shaped for the front panels, the best place to attach the tie is at the start of the shaping (armpit level).
Thread the chain through both sides – we inserted our chain between two double crochets in the 5dc cluster. Tie in a bow.
Finish & Celebrate The Rosewood Crochet Tie Up Top
Weave in all your ends.
Congratulations you have finished The Rosewood Crochet Tie Up Top and we hope you enjoyed this free crochet pattern.
Please support us. We are trying to keep all our crochet patterns free for everyone, when you access them online. We meet the costs of running this website through coffee donations at https://ko-fi.com/kiksandjackcrochet and ad revenue. When you buy us a cup of coffee, you buy us a cup of motivation. Thank you for keeping us motivated and inspired every day to keep designing free crochet patterns for you.
It would be amazing to see a photo of your completed work on instagram. Tag your version of The Rosewood Crochet Tie Up Top @kiksandjackcrochet or just click on the link to follow us for our upcoming free designs.





